结合响应面法与网格法的低速翼型优化设计

本文首先了介绍响应面法和网格法的基本原理,翼型绕流场分析使用有限体积法空间离散和RUNGE-KUTTA时间迭代格式进行N-S方程计算,由翼型表面压力和摩擦力数值积分得到升力和阻力.然后,以NACA0012和GAw-1为算例,结合响应面法和网格法进行低速翼型的减阻优化设计,算例表明:在应用响应面法进行低速翼型优化时,采用...     

Characteristics of field line resonance type geomagnetic pulsations and variations of plasmaspheric plasma density distribution

The period of field line resonance (FLR) type geomagnetic pulsations depends on the length of the field line and on the plasma density in the inner magnetosphere (plasmasphere), where field lines are closed. Here as FLR period, the period belonging to the maximum occurrence frequency of the occurrence frequency spectrum (equivalent resonance curve) of pulsations has been considered. The resonance system may be replaced by an equivalent resonant circuit. The plasma density would correspond to the ohmic load. The plasma in the plasmasphere originates from the ionosphere, thus FLR period, occurrence frequency are also affected by the maximum electron density in the ionosphere. The FLR period has shown an enhancement with increasing F region electron density, while the occurrence frequency indicated diminishing trend (possible damping effect). Thus, the increased plasma density may be the cause of the decreased occurrence of FLR type pulsations in the winter months of solar activity maximum years (winter anomaly).     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

不等温空腔的有效发射率计算

采用Monte-Carlo法对不等温空腔的有效发射率进行计算分析,讨论了腔壁的不等温性、材料的光谱发射率和方向发射率对法向有效发射率的影响,为黑体辐射源的设计提供了理论计算依据。     

陀螺经纬仪在北向基准检测中的应用研究

利用高端精密仪表——陀螺经纬仪,确定与检测棱镜、转台、地标北向基准准确度。在说明了陀螺经纬仪寻北原理、使用方法的基础上,描述了棱镜、转台、地标等检测方法和技术要求。     

基于热敏电阻的气体温度测量误差分析

挤压气体内部温度的精确测量对确定贮箱内推进剂剩余量和提高氧化剂和燃烧剂的混合比控制精度有重要意义.提出了一种基于热敏电阻的矢量测温方法,通过测量气瓶壁面温度推算气体内部真实温度,分析温度电阻非线性特性、温度—电压处理电路、A/D采样非线性等因素导致的温度测量误差,最终获得系统自身的温度采集误差,在此基础上分析了影响此误差的主要因素.最后分析了外界干扰引起的测量噪声对温度测量的影响,并采用小波降噪的方法对此进行降噪处理,使温度测量精度得到较大改善,并最终确定了内部气体温度的测量误差.     

基于风洞试验的非定常空气动力模型识别

在某飞机模型大振幅风洞试验的基础上,分析讨论了单自由度叠加模型、动导数模型、混合模型和非定常模型的适用性.结果表明,单自由度叠加模型、动导数模型和混合模型在小攻角时均是可用的,在大攻角时都不能正确反映飞机的非定常迟滞特性;但与前两种模型相比,混合模型在中等攻角时仍然适用.对于非定常模型,无论在小攻角还是大攻角时,均能较好地反映耦合运动的非定常气动特性.     

载人航天空空通信子系统及其关键技术

介绍了实现神舟运输飞船与天宫目标飞行器间数据通信和传输的空空通信子系统的构成,以及空空通信机的功能及其主要性能指标。空空通信子系统采用抗干扰能力强、保密性优的直接序列扩频通信技术。分析了其中的核心中频解扩解调中的伪码同步和载波同步等关键技术,应用数字解调方案降低了子系统调试难度,提高了可靠性。     

运载器末助推段非线性姿态控制器设计

根据单摆模型近似晃动质量推导晃动运动与姿态运动的动力学方程,基于状态相关黎卡提方程方法,综合动态逆控制方法设计了运载器末助推段非线性姿态控制器,由状态反馈实现姿态跟踪和晃动抑制。因实际中模拟晃动运动的单摆状态无法测量,引入输出多采样率技术,通过在一个采样周期内多次检测被控对象的输出估计状态,实现设计的状态反馈控制律。数...     

受控液扇撞击的混合特性研究

对溅板式层板喷注单元撞击后产生的两个相同受控液扇的混合特性进行研究,探讨液扇扩张角β对混合效率因子Em的影响。研究过程中对圆柱射流流强分布数学模型进行分析并改进,建立了适用于两个相同受控液扇撞击后的流强分布的数学模型。模拟计算Em值与试验值的偏差在-0.86%~12.9%之间。研究结果表明：当β〈60°时,Em随β的增...